home *** CD-ROM | disk | FTP | other *** search
- Path: zynet.net!usenet
- From: steve@cornbria.zynet.co.uk (Steve Bastable)
- Newsgroups: comp.sys.amiga.misc
- Subject: Re: MMU not working!
- Date: 27 Jan 1996 17:13:09 GMT
- Organization: Zynet Ltd
- Message-ID: <755.6600T976T617@cornbria.zynet.co.uk>
- References: <Pine.OSF.3.91.960118130500.27990C-100000@leofric>
- NNTP-Posting-Host: cornbria.zynet.co.uk
- X-Newsreader: THOR 2.22 (Amiga;TCP/IP) *UNREGISTERED*
-
-
- Hello Wowbagger, in "MMU not working!" you worte...
- >Hi How do you activate the MMU on the BLizzard 1230 IV 4MB ram FPU, I can
- >not figure this one out at all. With the blizzard in the trapdoor does
- >the trap door bend slightly of does it lay flat?
-
- >Cheers.
- > Andy.
-
- On the 1230 III there is a jumper on the board. This should be factory
- set depending on whether the board is the EC version or not. If set it
- turns the MMU off. Maybe it's the same on the 1230 IV?
-
- Cheers,
- Steve.
-
- -----------This Is An Ascii Drawing Free Signature-----------
- You Have Been Reading A Missive From:
- Steve Bastable - steve@cornbria.zynet.co.uk
-
- "It Is Better To Have Planned And Cancelled Than Never To Have
- Planned At All"
-
-